Analysis of sawn lumber production from logging residues of branchwood of Aningeria robusta and Terminalia ivorensis

Abstract

One way of meeting the supply demands of the wood industry is through the reduction of waste in timber processing. It has been estimated in Ghana that for every tree felled, nearly 50% of the tree volume is left in the forest in the form of branches, crownwood, and stumps. In this study, the potential of utilizing branchwood as raw material from logging residues to help meet the timber demands of the downstream processing sector was analyzed experimentally. The sawing characteristics of the branchwood of Aningeria robusta and Terminalia ivorensis with diameters in the range 10-25 cm using live sawing and cant sawing methods were determined using a randomized complete block design, 2 � 4 factorial with three replications. Experimental results indicate that, the relative lumber value yields for first and second grade boards of A. robusta and T. ivorensis branches were 25 and 20%, respectively, while the green lumber volume yields were 40 and 32%, respectively. A high proportion of sapwood and the occurrence of washboarding in T. ivorensis contributed to that species' relatively low lumber value and volume yield. The experimental results further indicate that the sawing technique used had no significant influence on lumber yields. However, at 5% level of significance, significant differences in lumber yield existed between some of the diameter classes. � Springer-Verlag 2006.